Ships Nostalgia - View Single Post - Doxford Engines 3-legged
View Single Post
  #15  
Old 28th March 2008, 17:16
averheijden's Avatar
averheijden averheijden is offline  
Senior Member
 
Join Date: Jan 2007
My location
Posts: 657
Quote:
Originally Posted by jolee View Post
I am researching details of 3-cylinder Doxford Engines built prior to turboblowers becoming standard about 1940.
A few main features I've found out so far but need verification: 1. They are famous for economy (helped win the battle of the Atlantic). 2. The throw of the crank for the Upper Cylinder was half the throw for the Lower Cylinder. 3. Some may have had open crankcases. 4. The scavenge pump was driven by a pair of parallel levers connected to the upper No 2 cylinder con rods. 5. Their Engine Frames were cast rather than fabricated.
I've been trawling the www for details so I can build a representative model. There must have been hundreds of these 3-legged Doxfords built but now its hard to find enough drawings to show how they were made and operated.
I'd be very appreciative if any reader could throw some light on this not-too-distant piece of Marine Engineering history.
best regards,
Jolee
http://i50.photobucket.com/albums/f3...n/OldTimer.jpg

DOXFORD: 520LB3 for the first "ECONOMY SHIP'S

Note:
* Upper Piston Cooling with outlet "dipper pipe"
* On the left: The 3 Fuel Oil Pumps with accumulator bottle on top.
* Sight Glasses on the Crankcase doors.

Regards
Alfons
Reply With Quote